ThomasNet
Five Penn Plaza
New York
NY 10001, USA
Phone: (212) 290 7390
Fax: (212) 290 7390
E-mail: salesengineers@thomasnet.com

 
All Categories1 > Heaters > Antenna & Cable Testing > Power Sensors > 5011 Terminating Power Sensor Series > Item # 5011  


Item # 5011, 5011 Terminating Power Sensor

selection
  • Significant cost and time savings, easy to use and field ready
  • No calibration and no elements required
  • Both digital as well as analog modulations including (CDMA, GSM, TDMA, 8-VSB and COFDM)
  • Broadcast Transmitter Power with accuracy of ± 5% of readings
  • Measure power directly or via coupled test port



 Specifications 

Sensor Type
Terminating Power Sensor. Terminated average power measurement.

Power Range
-20.000 to +10.000 dBm (10.000 µW to 10.000 mW)

Peak/Average Ratio
12 dB max.

Accuracy
± 5% of reading ± 1mW RSS (excluding mismatch uncertainty).
When operating below 100 MHz and above 40°C, add 1%.

Warm Up Time
5 Minutes

Nominal Impedance (Ω)
50

Input VSWR
Typical 1.03 (36.6 dB return loss); maximum 1.20 (20.8 dB return loss)

Connectors
Input Connector - Precision N Male; Output Connector - Male DB-9 to interface Digital Power Meter or Site Analyzer®

Power Supply
From host instrument via cable connection

Operating Temperature [°C (°F)]
-10 to 50 (14 to 122)

Storage Temperature [°C (°F)]
-40 to 80 (40 to 176)

Humidity, Max.
95% maximum (non-condensing)

Altitude
15,000 ft. operating

Size [inches (mm)]
6 inch long (including connector) : 1.5 inch diameter

Weight
3/4 lbs max.

J_image test



Print Back