Item # 5011-EF, 5011-EF Terminating Power Sensor On Sales Support Sample

Registered Users – Sign In

Search Catalog



	All Categories1 5011 Terminating Power Sensor Series
	Valves, Nuts and Bolts


All Categories1 > Heaters > Antenna & Cable Testing > Power Sensors > 5011 Terminating Power Sensor Series > Item # 5011-EF

Item # 5011-EF, 5011-EF Terminating Power Sensor

selection

Significant cost and time savings, easy to use and field ready
No calibration and no elements required
Both digital as well as analog modulations including (CDMA, GSM, TDMA, 8-VSB and COFDM)
Broadcast Transmitter Power with accuracy of ± 5% of readings
Measure power directly or via coupled test port

Specifications

Plug and Play Solution

Sensor Type		Terminating Power Sensor. Terminated average power measurement.

Frequency Range		40 MHz - 12 GHz

Power Range		-20.000 to +10.000 dBm (10.000 µW to 10.000 mW)

Peak/Average Ratio		12 dB max.

Accuracy		± 5% of reading ± 1mW RSS (excluding mismatch uncertainty). When operating below 100 MHz and above 40°C, add 1%.

Warm Up Time		5 Minutes

Nominal Impedance (Ω)		50

Input VSWR		Typical 1.05 (32.3 dB return loss); maximum 1.25 (19.1 dB return loss)

Connectors		Input Connector - Precision N Male; Output Connector - Male DB-9 to interface Digital Power Meter or Site Analyzer®

Power Supply		From host instrument via cable connection

Operating Temperature [°C (°F)]		-10 to 50 (14 to 122)

Storage Temperature [°C (°F)]		-40 to 80 (40 to 176)

Humidity, Max.		95% maximum (non-condensing)

Altitude		15,000 ft. operating

Size [inches (mm)]		6 inch long (including connector) : 1.5 inch diameter

Weight		3/4 lbs max.